Airsoft Gun Pull Trigger Nothing Happens

There may exist a number of reasons why your airsoft gun wont shoot. The reasons range from uncomplicated wiring issues to more than serious ones like gears with broken teeth.

Reasons Why Airsoft Gun Wont Shoot

First, hither are a few reasons why an airsoft gun wont shoot:

Reason i: You Used Depression Quality Bulletin board system

Depression quality Bbs can harm your airsoft Gun in many ways. The beginning one is that a poorly fabricated airsoft BB leaves fragments within your airsoft gun and this volition cause the gears to start jamming up and breaking.

The other fashion that poorly made airsoft BBs damage airsoft guns is reducing the accuracy of the trajectory of your shot. This happens when Bulletin board system that have seams scratch the butt and start deforming it. With enough wear and tear, the barrel starts pointing your Bbs the wrong direction.

Choosing the right BBs will extend the lifespan of your airsoft gun and reduce the number times that it jams

How to Ready This

Employ high quality BBs: The all-time quality Bbs are double polished and have no seams. They need to be perfectly circular and have consistency from BB to BB. Cheap bbs come with a lot of inconsistencies and seams on the bb body.

A good mode of testing for consistency is picking a handfull of Bulletin board system from the bag and looking carefully at each bb for imperfections. Brands with a low number of BBs that are deformed are the all-time to use.

The best BB brands are perfectly smooth and have no seams. This prevents them from scratching the inner barrel of your airsoft gun and changing the internal dynamics of how your gun shoots.

Making sure that yous have the correct Bulletin board system for your gun also helps to prevent jamming. If your gun uses a metal gearbox, you lot volition need to use 0.20gram Bbs or college.

Here is a short video by John Douch on why you should not use cheap bulletin board system

Reason 2: You Blew a Fuse

If your gun does nothing when you pull the trigger, even on a full charge, its possible that you accept blown the fuse to your gun.

I reason for this happening is when the gears jam and the gun trys to send besides much energy to gratuitous up the gun.

Some other problem is the wiring tangling together with the motor pinion causing a short circuit. When two wires that are non supposed to touch come up into contact, this will cause a brusk excursion.

The other reason may exist that you are using the wrong fuse for your gun. Check with the manufacturer to find out the appropriate fuse for your gun if this is the trouble.

How to Fix a Broken Fuse on an Airsoft Gun

Hither is a video explaining where to detect your airsoft gun's fuse and how to replace information technology.

Yous can tell that a fuse is blown by checking if the wire going through the fuse is all connected. If it is broken or discolored, then is probably blown. Another way to check if information technology its the fuse is to connect the two ends without the fuse and attempt to shoot the gun. If it shoots ,then you lot know that it is the fuse.

A blown fuse is likely the symptom of a bigger problem. If the problem keeps recurring, yous volition need to investigate further to find the root crusade.

If the trouble is wiring brusque circuiting, you will need to do rewiring of the airsoft gun. This tin can be a daunting task and here is a video that will requite you lot an idea of what is involved.

Reason 3: Burnt Trigger Contacts

This commonly happens when black residue builds up on your trigger contacts. This is due to arcing that happens on the trigger contacts. Single fire puts a lot of carbon on the trigger contacts due to arcing. This is commonly over a long catamenia and the gun may work fine for a while simply when the carbon builds up, the gun may eventually end working.

How to fix burnt trigger contacts on your airsoft gun

This is actually a quick ready: take apart your gun and clean the tips with a soft damp cloth. Brand certain everything is dry before assembling the airsoft gun back together.

When cleaning the gun doesn't aid, then y'all can effort the solution given past Jeffie Jeff. This will involve replacing the contacts and then please read up on how to supervene upon the contacts in your own airsoft gun before you lot open up your airsoft gun.

Other Reasons

Reason 4: Worn Out Motor Brush Springs

Reason 5: Cut Wires on the Airsoft Gun

Reason 6: Locked/Jammed Gearbox

Reason 7: Broken Gears

Reason 8: Burnt Trigger Contacts

Reason 9: Stripped Piston